Oatsbasf Protective Aluminum Metal X Shape Bumper Case For iPhone X

Oatsbasf Protective Aluminum Metal X Shape Bumper Case For iPhone X:

SHOCK-ABSORPTION PROTECTION

This iPhone X bumper case is designed with 4 Detachable Air Cushion Silicon Pads in the 4 corners. The elastic silicon pads are higher than corners, provides nice drop resistance. Raised edges lift the camera and screen away from flat surfaces.

RAISED EDGES PROTECTION

This Apple iPhone X bumper case is designed with Raised Edges in all bumper frame and corners, to lift the screen and camera away from flat surfaces. Bumper case also allows better heat dissipation, esp while charging. This iPhone X bumper is designed with raised 1.5mm edges lift the camera and screen away from flat surfaces for better protection of your device.

SUPPORT WIRELESS CHARGING

This iPhone X case is compatible with most/all wireless chargers after many tests. You don't need to remove the case when wireless charging.

INSTALLATION INSTRUCTIONS

1.Put the case back up, then loosen four screws with screw driver and remove the 4 corners;
2.Put your phone back up and put the camera corner on the camera, then put the bumper part. Insert the tiny pillar into the hole of the camera corner. Then tighten the screw for 3 rounds, but not too tight;
3.Put the other 3 corners clockwise in the same way;
4.Check to make sure the bumper part are well inserted into the 4 corners;
5.Tighten the 4 screws to the utmost, so it will not loosen easily.