OPPO Enco X2

OPPO Enco X2:

Dual-Driver Design

OPPO Enco X2 features a dual driver setup with an 11mm dynamic driver paired with a 6 mm planar diaphragm driver. With the dual driver design, the TWS earbuds make sure you never miss any lows or high notes even while playing bass-heavy music.

LHDC4.0 Technology

The Enco X2 uses Bluetooth 5.2, supports LDAC and LHDC 4.0 transmission protocol enabling it to support a code rate of up to 900kbps. Enco X2 also offers support for the usual AAC and SBC audio codec.

Bluetooth Low Latency Dual Transmission 

OPPO Enco X2 uses Bluetooth 5.2 to connect with devices and features a new updated dual-core chip. OPPO Enco X2 has a lower latency of 94ms for gaming and video consumption.

45dB Noise Reduction Depth

OPPO Enco X2 has a 38 dBV/Pa microphone setup which offers multiple levels of noise cancellation including Smart Noise Cancellation, Max Noise Cancellation, Moderate Noise Cancellation, Mild Noise Cancellation, Transparency Mode, and Vocal Enhancement. Enco X2 has three microphones that use Bone Voiceprint AI to reduce noise during calls.

Touch Operation

OPPO Enco X2 can be paired with OPPO phones running ColorOS easily by simply opening the case.

• Double-click the ear to play the next song. When a call comes in, you can also double-tap to answer or refuse the call.
• Long press the headset for 1s to switch the noise reduction mode.

Long Battery Life

• OPPO Enco X2 packs a 57mAh battery offering a 9.5 hours of music playback on a single charge with noise cancellation off. This can be further extended to 40 hours with the charging case.
• With maximum noise cancellation and a 50% volume level, the Enco X2 can provide up to 5.5 hours of playback on a single charge and 22 hours with the charging case. The Enco X2 can provide up to 2 hours of playtime with just 5 minutes of charge time.

2 Charging Versions

1. The OPPO Enco X2 has 2 versions, the one is wired version, which only supports wired charging, and can be charged through its USB Type-C port.
2. The other one is wireless Charging Version that supports Qi wireless charging, it can be charged through its USB Type-C port or wirelessly. The device can be reverse charged with a smartphone by just placing them on the back of one that supports reverse charging.

IP54 Dustproof & Waterproof

OPPO Enco X2 has passed the professional structure design and the IP54 dustproof and waterproof certification. Whether it is gym exercise or outdoor commuting, you can protect the headphones.

Specification

• Driver: φ11 mm dynamic driver + φ6 mm planar diaphragm driver
• Speaker sensitivity: 118dB @1kHz
• Frequency response range: 20Hz ~ 40kHz
• Audio codec: LHDC / AAC / SBC
• Noise control modes: Smart Noise Cancellation / Max Noise Cancellation / Moderate Noise Cancellation / Mild Noise Cancellation / Transparency / Vocal Enhancement / Noise Cancellation Off
• Call Noise Cancellation: Triple-Microphone With Bone Voiceprint AI Call Noise Reduction
• Microphone sensitivity: -38 dBV/Pa
• Binaural Low-Latency Bluetooth® Transmission: Supported
• Bluetooth version: BT 5.2
• Effective Bluetooth range: 10m
• Battery type: Rechargeable lithium-ion battery
• Battery capacity: 57mAh(earphones)/ 566 mAh(charging case)
• Music play time (LHDC, Default setting, 50% volume): Max Noise Cancellation: 5h (single charge) / 20h (with charging case), Noise Cancellation Off: 6.5h (single charge) / 27h (with charging case)
• Music play time (AAC, Default setting, 50% volume): Max Noise Cancellation: 5.5h (single charge), 22h (with charging case), Noise Cancellation Off: 9.5h (single charge), 40h (with charging case)
• Cable Charge Time: 60 min (earphones) | 90 min（charging case）
• Charging port: USB Type-C
• Charging input (charging case): 5 V ⎓ 2 A
• Charging output (earphones): 5V ⎓ 400mA
• Weight (each earbud): 4.7g(±0.2g)
• Weight (charging case): 47g(±1g)
• Weight (entire device): 56.4g(±1g)
• Charging case size: 66*49.3*22.7 mm